Mavic Pro

Repair Complete
Customer fault description: After crashing into tree I have 2 following issues: - gimbal shakes and is not steady during flight - (possible new gimbal motor needed) - gimbal does is no longer able to tilt up and down - (possible new flex cable needed)

Spark

Repair Complete
Customer fault description: Needs a new bottom.sensor cover and 3 lights cover.and write re welding to motor.have send pics by e mail and got price from you

Phantom 3 Pro

Repair Complete
Customer fault description: Camera and gimbal have become detached from drone , one prop truss threaded onto prop motor and needs removing.

GL300

Repair Complete
Customer fault description: Controller not charging

GL300

Repair Complete
Customer fault description: gl300 wont charge

Mavic Pro

Repair Complete
Customer fault description: Crashed into swimming pool. Now no radio comms.

Mavic Air

Repair Complete
Customer fault description: Arm of drone snapped after collison with tree. Rest of unit fine.

gl300

Repair Complete
Customer fault description:

Phantom 3 4K

Repair Complete
Customer fault description: broken gimbal

Mavic pro

Repair Complete
Customer fault description: i have crashed my DJI Mavic Pro and the gimbal has broken, it still receives a picture image but it is unstable and overloads the motor.

Phantom 3 SE

Repair Complete
Customer fault description: Controller alarms whenever switched on as if not charged - won?t charge

HP laptop

Repair Complete
Customer fault description: laptop needs factory reset

Phantom 3 Pro

Repair Complete
Customer fault description: Gimbal damage as discussed by email. snapped gimbal

Phantom 3 Pro

Repair Complete
Customer fault description: The drone hit a tree and fell onto some rocks. Seems the only issue is the gimbal doesnt pitch/tilt anymore. Yaw and recording is ok, calibration completes ok. Gimbal doesnt move up and down

Phantom 3 pro

Repair Complete
Customer fault description: sounds like your phantom will need a new IMU. I would be able to fit that and update your phantom for ?52.50 labour and a new IMU is ?45.

Phantom 4 Pro

Repair Complete
Customer fault description: The drone crashed. The battery that is in the drone is obviously damaged. In addition, the landing legs are damaged and i suspect the camera mount is also damaged.

Phantom 4

Repair Complete
Customer fault description: The camera wobbles - I believe this is caused by the disformed yaw arm affecting the balance.

Phantom 4 Pro

Repair Complete
Customer fault description: Repair completed by myself after crash. Gimbal motor overload error now occurs and there is a clicking sound when camera is rotating down when not powered up. Also main ribbon needs re gluing to camera holder not done incase needs removing

Mavic air

Repair Complete
Customer fault description: needs new cooling fan

Phantom 4

Repair Complete
Customer fault description: noise from gimbal / jumps occasionally.

Mavic air

Repair Complete
Customer fault description: Ive managed to clip a tree which resulted in the MA falling 30ft and hitting branches on the way down. An error message "processor chip critically overheated" shows up and suggests it will be ok when it cools down but the fan isn't kicking.

Mavic air

Repair Complete
Customer fault description: Battery status error after water contact.

Phantom 3 Advanced

Repair Complete
Customer fault description: Handset battery not charging properly and not holding charge. Tried to update/reverse firmware. Also tried to reset handset, and disconnect battery cable and reconnect. Just about everything that Google could offer to be honest.

phantom 4 controller

Repair Complete
Customer fault description: wont charge

Phantom 3 Adv

Repair Complete
Customer fault description: stress cracks

Phantom 3 Std

Repair Complete
Customer fault description: The drone needs a new shell & just making sure its ok

Phantom 3 Advanced

Repair Complete
Customer fault description: controller will not charge

Mavic

Repair Complete
Customer fault description: gimbal overload error. ?ribbon cable error

Phantom 3 Std

Repair Complete
Customer fault description: Compass motherboard switch has come apart after crash discussed via email

GHD pcbs

Repair Complete
Customer fault description: repair PCBs

GHD pcb repair

Repair Complete
Customer fault description:

Phantom 3 Pro

Repair Complete
Customer fault description: Dead battery in controller. Please see email sent on 10/04 and also received from Scott on 11/04

Phantom 3 Pro

Repair Complete
Customer fault description: the drone fell out of the sky. after advice from you it appears the drone may have lost contact with the battery. also the cradle for the camera is bent

Phantom 3 Advanced

Repair Complete
Customer fault description: Controller will not power up. Flashes through 1-4 intermittent white lights on charge and no other lights illuminate.

phantom 3 gl300 controller

Repair Complete
Customer fault description: wont link to phantom and beeping

Phantom 3 Advanced

Repair Complete
Customer fault description: Can't link with phone app but camera recording is fine.

Phantom 4 Pro Plus

Repair Complete
Customer fault description: Gimbal has been repaired and reporting motor overload error. Front and rear vision sensors reporting errors, shell needs replacing.

Phantom 3 Pro

Repair Complete
Customer fault description: Crashed and now wont connect to controller.

Phantom 3 Pro

Repair Complete
Customer fault description: Controller and Phone not connecting to the Drone. Ever since the last update was done.

Mavic

Repair Complete
Customer fault description: Gimbal mount vibration plate broken just by the screws.

GL300

Repair Complete
Customer fault description: will not fully charge

Phantom 4 Pro Plus

Repair Complete
Customer fault description: Camera Broken Off. I crashed the drone.

Mavic

Repair Complete
Customer fault description: Front arm cracked

PCB repair

Repair Complete
Customer fault description: faulty pcb

Phantom 4

Repair Complete
Customer fault description: needs new yaw motor and arm

Phantom 3 sta

Repair Complete
Customer fault description: needs new ribbon

Phantom 3 Pro

Repair Complete
Customer fault description: The controller will not talk to the drone. The app does not register the drone since the upgrade and is stuck on 'how to connect' view - will not go onto camera view. Was working fine before upgrade.

Mavic

Repair Complete
Customer fault description: Broken gimbal - i dont know the full extent of the damage but i can see vibration plate and and ribbon cable are broken. Also front foot has broken off the left arm and ripped cable inside to foot so probably needs whole arm replacing.

Phantom 3 ADV

Repair Complete
Customer fault description: 2 Broken Propellers and a Gimbal

Phantom 4

Repair Complete
Customer fault description: cracked the gimbal arm and the body ( only slightly ) I replaced the arm with an alloy one but one of the screws was not good , but when I powered it up the gimbal had a frenzy and I cannot take control of the gimbal ! I am guessing I have damaged th

5 or more pcbs

Repair Complete
Customer fault description:

5 or more MK4B-Repair

Repair Complete
Customer fault description: Have MK4 pcb round buzzers where the fault is not the PIC can you repair please Scott?

5 or more MK4B-Repair

Repair Complete
Customer fault description: MK5 square buzzer complete

Phantom 4 Pro Plus

Repair Complete
Customer fault description: needs new yaw motor and shell

Phantom 3 Std

Repair Complete
Customer fault description: Gimbal broke after crash, have replaced Ribbon Cable, Yaw Arm and Vibration Plate. Gimbal powers up, wont calibrate and no Video feed. DJI GO App says disconnected

Mavic

Repair Complete
Customer fault description:

Mavic

Repair Complete
Customer fault description: no video image

Phantom 4

Repair Complete
Customer fault description: broken gimbal arm ,motor cable and ribbon cable

Mavic

Repair Complete
Customer fault description: Crashed 1 front arm broken 1 may be ok both axis's damaged and removed to allow packaging vibration mount snapped

Phantom 4 Pro

Repair Complete
Customer fault description: No cam signal

Phantom 4 Pro

Repair Complete
Customer fault description: It says gimbal overload I think the yaw arm is bent

Phantom 3 Advanced

Repair Complete
Customer fault description: Controller links to drone, then when it takes off goes up about 30feet and message says signal lost and the drone lands again

Phantom 4

Repair Complete
Customer fault description: My P4 landed heavily on one arm with result that arm end close to rotor is bent upwards by about 2 mm - end of prop just touches casing when not rotating. Upper casing has consequent crease and tear. Rotors do not start. (see my email)

Phantom 4 Pro Plus

Repair Complete
Customer fault description: Slipped on ice today and fell backwards onto my phantom 4 pro and caused the gimbal to break off the legs have snapped and there is a crack on the base of the chassis . The camera itself seems to be ok but need the rest repaired / replace

Phantom 3 Pro

Repair Complete
Customer fault description: Gimbal appears to be bent and does not move properly. Drone does not hover properly either.

Phantom 3 Std

Repair Complete
Customer fault description: camera mount broken, motor arm bent

Phantom 4

Repair Complete
Customer fault description: Only charges to two white lights on controller

Phantom 3 Advanced

Repair Complete
Customer fault description: Camera not turning on, very intermittent

Mavic

Repair Complete
Customer fault description: Dropped Drone onto wooden floor. no crash involved, drone was switched off at time. Gimbal was only thing effected, will not move when using controller but moves when drone is turned on, will only calibrate up to 5% then goes no further.

Mavic

Repair Complete
Customer fault description: Gimbal camera has cracked off the mount after a collision.

Mavic

Repair Complete
Customer fault description: Broken anti-vibration plate and camera gimbal arm

Phantom 3 Advanced

Repair Complete
Customer fault description: Controller wont charge fully

Mavic

Repair Complete
Customer fault description: Gimball overload error/fault. Requires (hopefully) only new flat cable for gimball. Camera/motors all working.

Phantom 3 Pro

Repair Complete
Customer fault description: Gimbal has a mind of its own

Phantom 3 Std

Repair Complete
Customer fault description: After a crash the gimbal no longer moves.

Phantom 4 Pro Plus

Repair Complete
Customer fault description: Submersed in fresh water camera did not go under

Phantom 3 Pro

Repair Complete
Customer fault description: Remote control not charging, and can't conect to the drone.

Phantom 3 SE

Repair Complete
Customer fault description: Drone started spinning and crashed as i was coming into land . Think it will need new cases landing gear and camera arm readjusted Maybe its time for a new battery, might of hit a bird / bat not sure just started sinning as i was starting

DJI Phantom 3 se

Repair Complete
Customer fault description: Phantom 3se Body shell broken around screw areas/ landing gear damaged jerky hover. Does seem to fly ok seems fine apart from hover not sure if that's to do with body not being able to lock together firmly

Phantom 4 Pro

Repair Complete
Customer fault description: shell needs replacement for because it's damaged, the gimbal looks fine except where it is connected the top part to the shell

Phantom 2

Repair Complete
Customer fault description: needs motor replaced

Phantom 3 Pro

Repair Complete
Customer fault description: Hit a tree and won't calibrate

Mavic

Repair Complete
Customer fault description: Mavic Pro went into top of tree. We managed to retrieve but gimbal may have been damaged. When I turn it on it moves left and right but wont operate correctly. Drone flys ok.

Phantom 3 Pro

Repair Complete
Customer fault description: will not charge

Mavic

Repair Complete
Customer fault description: Following light crash, message on controller reads 'motor overloaded check gimbal for obstruction'. Camera works OK, but controller won't fly with these problems.

Phantom 3 Std

Repair Complete
Customer fault description: Fault- Gimble Motor and Camera not working.

Phantom 3 Std

Repair Complete
Customer fault description: focus casing apart flys with a lisp, leans right Gimbel not horizonatal

Phantom 3 Std

Repair Complete
Customer fault description: crashed doesnt work

Phantom 4

Repair Complete
Customer fault description: Hi the drone was working fine until I decided to strip the gimbal camera part down to remove a cloudiness mark on the internal lense )couldn't dclean it of so this needs replaced),pit it back together but the gimbal is not centrein

Phantom 3 Std

Repair Complete
Customer fault description: gimbal separated at joint

Phantom 4

Repair Complete
Customer fault description: Crashed drone - now comes up with ESC2 and ESC4 errors.

Mavic

Repair Complete
Customer fault description: Crash resulted in gimbal connectors damage. Looks like it's just the rubber that attaches the camera/gimbal to the base plate.

Phantom 3 Pro

Repair Complete
Customer fault description: It hit a tree and fell down breaking the gimbal arm and snapping the cables

Phantom 3 Pro

Repair Complete
Customer fault description: Snapped of gimbal following crash

Phantom 3 Std

Repair Complete
Customer fault description: After a crash, my drone is reporting an invalid battery, despite this being the same battery that came with the drone, and fully inserted allowing the drone to power up.

Mavic

Repair Complete
Customer fault description: Propeller hit wall and drone fell 20-30 feet. Front left arm slightly buckled / damaged and camera seems very dark in auto mode.

Phantom 3 Std

Repair Complete
Customer fault description: Drone crashed - Main board damaged, Shell damaged. Email contact with Scott has resulted in an assessment that these need to be replaced.

Phantom 2

Repair Complete
Customer fault description: Couldn't get compass lock attempted take off and it shot off and crashed now it won't start and the top near the GPS is getting hot

Phantom 3 Std

Repair Complete
Customer fault description: Following a crash the grey plastic platform that attaches the camera system to the main body of the drone has broken and several of the wires have been pulled out.

GL300

Repair Complete
Customer fault description: snapped antennas and faulty wheel

Phantom 3 Pro

Repair Complete
Customer fault description: I hit a tree branch high up - it span but didn't hit the ground. It flys OK now, but the footage is jumpy as if it's constantly re-calibrating or fighting to stabilise

Phantom 4

Repair Complete
Customer fault description: Client, has crashed this into water. Battery fried, suspected water damage to drone

Phantom 3 Adv

Repair Complete
Customer fault description: Hi, I have the phantom 3 advanced drone but the problem is the controller. The aerial has broken off at the base, and I have been told I need a new front. So can you fix it, and if so about how much. I live in Consett, and you guys are few and far be

Phantom 3 Adv

Repair Complete
Customer fault description: went crazy and crashed

Phantom 3 Pro

Repair Complete
Customer fault description: Following an update I get NO IMAGE TRANSMISSION SIGNAL. I have tried reformatting the SD card many time, Ive tried downgrading to a previous firmware but I still get NO IMAGE TRANSMISSION SIGNAL

Complete PCB

Repair Complete
Customer fault description: Unknown

Complete PCB

Repair Complete
Customer fault description: I have 15 x Series 4 PCB's and 6 X series 5 PCB's to sell

Phantom 4 Pro

Repair Complete
Customer fault description: Gimbal yaw arm bent and 1 x landing leg cracked. Drone works perfectly since and have used it dozens of times after the crash. The only thing I had to do was reset the horizon on the gimbal as was slightly leaning to the side.

Phantom 3 Pro

Repair Complete
Customer fault description: Losing video signal immediately upon take off. When sat stationary the feed is ok but after a minute the picture slowly starts to deteriorate. Second fault is with the right stick,am not able to fully calibrate to the N&NE direction.

Mavic Pro

Repair Complete
Customer fault description: gimbal needs a new ribbon and arm plastic

Mavic

Repair Complete
Customer fault description: 'Disconnected' - and is always disconnected. I dropped my iphone 6s in water and after that it did not work. So i got another Iphone 6s and it still does not work!. Ive tried resetting the drone in DJI Assistant 2, updating firmware etc

Mavic

Repair Complete
Customer fault description: Gimbal overload, jolting around. thinks gimbal clamp is on

Phantom 3 sta

Repair Complete
Customer fault description: gimbal and motor

Phantom 3 sta

Repair Complete
Customer fault description: gimbal fell apart

Phantom 4

Repair Complete
Customer fault description: One of the motor casings has opened up and will not click back in.

Phantom 3 Std

Repair Complete
Customer fault description: Broken gimbal mounting plate on main body. Broken grey wiring ribbon. Broken propeller.

Mavic

Repair Complete
Customer fault description: Rear Right leg snapped off damaging body.

Phantom 4

Repair Complete
Customer fault description: I have a VIsion system error (e0003) with hardware malfunction Downward Left Vision Sensor Error (e0003) Downward Right Vision Sensor Error (e0003)

Phantom 3 Std

Repair Complete
Customer fault description: hi had a crash gimbal broke camera off breaking ribbon purchased a new ribbon fit this with care and it now says gyro errror and gimbal wont move at all camera works and looks like the drone also works

Phantom 3 Pro

Repair Complete
Customer fault description: Need firmware update? Drone and controller to be updated to enable unit to fly..

Phantom 4

Repair Complete
Customer fault description: Camera Gimlet replacwement and Ribon replacement

Phantom 4

Repair Complete
Customer fault description: crashed, new shell and gimbal needed

Phantom 3 Std

Repair Complete
Customer fault description: Suspected broken connection between the gimbal and the main unit. [As per email conversation with Scott Gray 08/05/2017]

Phantom 3 Pro

Repair Complete
Customer fault description: One motor stopped working And needs a update

Phantom 3 Std

Repair Complete
Customer fault description: One motor goes slow or not at all .I have changed motor but still does not work

Phantom 2-zenmuse

Repair Complete
Customer fault description: Transmit to monitor is jumbled. worked with a different monitor. Zen Muse spare ribbon inc Phantom will not take off - seems to be a power issue. Blades new, battery full, software updated. 2 engines replaced. 3 spares included.

Phantom 3 Pro

Repair Complete
Customer fault description: Seagull knocked it out the sky. Crashed into grass. Camera gimbal snapped fee from drone and gimbal bent.

Phantom 3 Std

Repair Complete
Customer fault description: needs new ribbon

Phantom 3 Std

Repair Complete
Customer fault description: Broken gimbal ribbon

Phantom 4 Pro

Repair Complete
Customer fault description: I landed badly / crashed from 30cm. No visible damage but the gimbal / camera don't respond / hang limp mostly or when does work on turn on still doesn't respond and eventually goes limp when you try to calibrate.

Phantom-Old

Repair Complete
Customer fault description: No apparent communication between controller and drone. Controls to do operate motors.

Phantom 4 Pro Plus

Repair Complete
Customer fault description: Cracked shell. Fell from high tree.

Phantom 2

Repair Complete
Customer fault description: GoPro 4 is not transmitting image to Flysight Black Pearl. Some communitcation exists as screen is black and goes fuzzy if camera turned off.

Phantom 3 Pro

Repair Complete
Customer fault description: Camera blinking,healt check

Phantom 4

Repair Complete
Customer fault description: Collision with another drone causing it to fall out the sky

Phantom 3 Std

Repair Complete
Customer fault description: 2 motor arms cracked,standard fault.please swap body shell for new one

Phantom 3 Advanced

Repair Complete
Customer fault description: Gimbal overload error & constantly moving following a crash. Could you also quote for replacing damaged shell.

Phantom 3 adv

Repair Complete
Customer fault description: Crashed and no longer works

Phantom 3 Std

Repair Complete
Customer fault description: One of the propeller rotators is slower than the other 4 which makes it unflyable.

Phantom 3 Std

Repair Complete
Customer fault description: I was in my parents garden, bringing the drone down slowly, the wind picked up taking it into the house breaking propellers then fell down onto garden chair

Phantom 3 Pro

Repair Complete
Customer fault description: (1) The gimbal can't calibrate and the camera just hangs, pointing downwards. The camera is fine as it transmits to the RC. (2) The image transmitted to the RC pixilates and breaks up whether indoors or outdoors.

Phantom 4

Repair Complete
Customer fault description: Hi my drone crashed, one motor is slightly bent and the wire connecting the light has been cut, I likely need a new body. How long would it take to repair?

Phantom 3 Pro

Repair Complete
Customer fault description: I crashed into something The camera mount is broken and some wires hanging out.

Phantom 3 std

Repair Complete
Customer fault description: bent camera. parts included

Phantom 3 Std

Repair Complete
Customer fault description: There is absolutely no response from the aircraft to a fully charged battery. Both flight batteries are fully charged. The drone has been stored since last summer, when it was working, and not touched until now.

Phantom 3 Pro

Repair Complete
Customer fault description: Hi, i had the drone do a fly away, it crashed into a tree and broke the camera of the arm and broke the ribbon cable, i have replaced both and they are working but i have no image showing on the screen other than the words dji, i have done

Phantom 3 Advanced

Repair Complete
Customer fault description: Replace gimbal arm and ribbon cable

Phantom 4

Repair Complete
Customer fault description: Hi, had a minor crash into some telephone lines, gimbal needs re adjusting back into place and a new landing panel, still get a preview but camara is not inline.

Phantom 3 Std

Repair Complete
Customer fault description: gimbal plate has snapped and the black and grey wires have come out.

DJI Phantom 4 Pro+

Repair Complete
Customer fault description: DJI Phantom 4 Pro+. Damaged parts ..... top & bottom shell, leg, camera lens gimble arm

Phantom 3 Std

Repair Complete
Customer fault description: I crashed it into a tree, I ordered some parts and repaired it myself, it flew once after the repair and next time I tried to fly it I couldn't get it to work at all.

Phantom 3 4k

Repair Complete
Customer fault description: Phantom 3 4k crashed. Body damage and gimbal damage. Looks like its taken a little knock to the lens too. If body damage doesnt affect flight please leave it. But can u check focus after the lens knock please?

Phantom 3 Advanced

Repair Complete
Customer fault description: camera footage all appears slightly out of focus, tried various settings, using polar pro filters, good conditions, poor conditions, all result in slightly blurry footage

Phantom 3 Advanced

Repair Complete
Customer fault description: Outer shell slightly damaged and bent upwards on rear right gimbal arm. Complete upper and lower she'll replacement needed (new shell enclosed)

Phantom 3 Pro

Repair Complete
Customer fault description: No motors running will not take off gimbal works moves takes photos & video but no live view on ipad screen controller say needs firmware update. bought second hand seller said worked when dispatched & must have been damaged in transit.

Phantom 4

Repair Complete
Customer fault description: Accident - bent Gimbal. Everything still flys and works except the gimbal is crooked. The legs have cracked plastic and may need repair also.

5 X MK4B-Repair

Repair Complete
Customer fault description: I have sent 9x pcb, you didn't have an option for that amount so I just chose your max amount. All just seem to be dead, one has the I.C. chip removed

Phantom 4

Repair Complete
Customer fault description: P4 fell out of the sky after clipping a tree branch at a height of 15 meters ish. Shell is cracked on one of the arms - New shell required

Phantom 3 Std

Repair Complete
Customer fault description: The Phantom was crashed into an overhead telephone cable resulting in the gimbal mount being broken and then antenna cables becoming detatched from the camera. I have purchase an antenna kit which I will include in the box.

Phantom 2

Repair Complete
Customer fault description: Drone loses connection intermittently with controller.

Phantom 3 Std

Repair Complete
Customer fault description: Lost signal from controller and hit tree, shell cracked

Phantom 2 Vision +

Repair Complete
Customer fault description: Gimbal issue. Jolts violently when switching on and the level adjuster is broken. It thinks level is wonky, if you know what I mean. I have adjusted this manually several times, but can't seem to get it to level anymore.

Phantom 3 Pro

Repair Complete
Customer fault description: No image transmission signal fault. Intermittent - happens most of time with very occasionally working. Tried taking SD card out, switching back on etc - works sometimes or may be coincidence.

Phantom 3 Pro

Repair Complete
Customer fault description: No Image Transmission between camera and Go Application so no video link. Everything else works correctly. All latest Software installed. Have sent Ipad to ensure repaired system works.

Phantom 3 Pro

Repair Complete
Customer fault description: Controller won't charge

Other

Repair Complete
Customer fault description: Controller not accepting charge. Dead no power lights.

Phantom 2 Vision +

Repair Complete
Customer fault description: After crash my camera wont live feed or take pictures....it was a slow low level crash..

Phantom 3 Pro

Repair Complete
Customer fault description: Drone will not fly, display on phone says lost RC connection.

Phantom 3 Std

Repair Complete
Customer fault description: Antenna broke on controller, opened up controller found where Ariel supposed to go but lost the gold clip to the circuit board

Phantom 3 Advanced

Repair Complete
Customer fault description: hi my name is Jason lyons I have a dji phantom 3 advance drone I have crashed it and the body is broken so needs a new body supplying and fitting the compass will not calibrate and one nsv light is broken rear right hand side I think

Phantom 3 Std

Repair Complete
Customer fault description: Crashed drone into a tree it still flies I have a new body could you please fit it for me ? Thank you Lucy

Phantom 3 Pro

Repair Complete
Customer fault description: I believe the entire camera motor is burned out. It was brand new and we ran it unwittingly for a full battery's worth of use with removable foam packing materials in place that stopped the camera from moving.

Phantom 2 Vision +

Repair Complete
Customer fault description: Upper body cracked. Please advise repair costs

Phantom 4

Repair Complete
Customer fault description: Broken case

Phantom 3 Advanced

Repair Complete
Customer fault description: As described in phone call. DJI app showing "esc error, contact DJI support"

Phantom 3 Pro

Repair Complete
Customer fault description: Crashed into the side of a building. Two motors twisted in their mountings. Damage to the plastic casing. Everything else seems to work fine.

Phantom 4

Repair Complete
Customer fault description: Would need it to get picked up by UPS and I would send you the entire box as purchased less the 2 broken rotors. wet phantom

Unselected :(

Repair Complete
Customer fault description:

Phantom 3 Advanced

Repair Complete
Customer fault description: I crashed my drone into a tree it then fell around 10m onto a tarred road the damage I can clearly see as below Camera/ Gimbal broke of base plate 1connection point of frame broken away from main body ( 2no screws/bolts forced out main frame at c

Phantom 3 Std

Repair Complete
Customer fault description: Having problems coneting rc to drone. I had a crash and camera wire ribbon got broken. I've replaced it but can't connect rc to drone now Please can you help

Phantom 4

Repair Complete
Customer fault description: crashed from approx. 1.6m and no have an issue with 1 no motor